Swivel Unit SES-9-S-190-H-0-0-P with dampers
Article number: 000000165421
Manufacturer: Friedemann Wagner GmbH
full torque in end-positions
adjustable swivel range 0-190°
piston diameter 2x38 mm
end-position monitoring possible
hydraulic dampers both-sided
- Pneumatic rotary actuator
- Reinforced design
- Swivel angle 0-190° externally adjustable
- High-strength aluminum housing with milled, external stop system
- Full force at end positions
- All interfering contours on one side
- Hollow stop screws for sensor mounting
- Various versions available
- Only available with shock absorbers due to forces involved
- Dampers accessible from outside
- Shock absorber failure detection possible
- For third position, dock additional module ZWP-9-SES
- Technical data see below
Technical Information: Technical data and illustrations are non-binding. All information is based on an operating pressure of 6 bar, air consumption is understood at 1 bar. We reserve the right to make changes at any time. All information is without guarantee.
Product Images: The original may differ from the product image used.
Choose options
Swivel Unit SES-9-S-190-H-0-0-P with dampers
Technical Information
| Control | 4/2 or 5/2 way valve bistable |
| Article Number | 165421 |
| Version | Strong |
| Axial Load stat. Compression [N] | 3780.0 |
| Axial Load stat. Tension [N] | 1622.5 |
| Damping | Hydraulic |
| Torque at 6 bar eff. [Nm] | 24.0 |
| Torque at 6 bar theo. [Nm] | 28.35 |
| Pressure Range | 4-8 bars |
| Compressed Air Connection | G1/8 |
| Adjustment Range [°] | 190° or +/- 95° around the center position |
| Weight [kg] | 7.0 |
| Integration Air Signal | 0-0 |
| Air Consumption per Cycle [cm³] | 318.0 |
| Mass Moment of Inertia max [kgcm²] | 64200 |
| Radial Load at Flange [N] | 3448.95 |
| Swivel Time [s] | 0.7-2.4 |
| Material Stops | Hardened steel |
| Material Stop Screws | Hardened steel |
| Material Housing | High-strength Al, anodized |
| Material Rack | 16MnCrS5 hardened |
Over 45 years of quality
Made in Germany
Since our foundation in 1979, we have been successfully manufacturing high-precision swivel, rotary indexing, lifting, linear and gripping units in Baden-Württemberg.
Special design features
with special benefits
Day after day, we meet the highest technical and quality requirements of our renowned customers.
Similar articles
Accesories
Watch animations