Rotary Indexing Table RSE-4-P-3-H-1-0-P, partition 3
Article number: 000000170212
Manufacturer: Friedemann Wagner GmbH
oscillating
turning direction can be changed
partition 3 | 120°
partition can be changed
integrated throttle
end-position monitoring possible
piston diameter 25 mm
hydraulic damper single-sided
single air grommet
- pneumatic rotary indexing table
- indexing convertible (accessories)
- air passage: channel "P" to G1/8 in the table
- oscillating version
- therefore two control valves are required
- any mounting position
- throttle serves to adjust the table speed
- technical data see below
Technical Information: Technical data and illustrations are non-binding. All information is based on an operating pressure of 6 bar, air consumption is understood at 1 bar. We reserve the right to make changes at any time. All information is without guarantee.
Product Images: The original may differ from the product image used.
Choose options
Rotary Indexing Table RSE-4-P-3-H-1-0-P, partition 3
Technical Information
| Control | 4/2 or 5/2 way valve bistable |
| Article Number | 170212 |
| Clamping Weight max [kg] | 14 |
| Axial Load stat. Compression [N] | 20000.0 |
| Axial Load dynamic [N] | 140 |
| Damping | Hydraulic |
| Torque Absorption locked [Nm] | 100.0 |
| Torque at 6 bar eff. [Nm] | 2.0 |
| Torque at 6 bar theo. [Nm] | 3.5 |
| Direction of Rotation | Commuting |
| Pressure Range | 4-8 bars |
| Compressed Air Connection | M5 |
| Mounting Position | any |
| Weight [kg] | 3.1 |
| Tilting Moment max [Nm] | 150 |
| Air Consumption per Cycle [cm³] | 40.5 |
| Mass Moment of Inertia max [kgcm²] | 175 |
| Face Runout Disc [mm] | 0.03 |
| Plane Parallelism Hous./Disc [mm] | 0.05 |
| Lateral Force Absorption stat [kN] | 10.0 |
| Concentricity Centre Bore [mm] | 0,03 |
| Cycle Rate / min | 50-200 |
| Pitch | 3 |
| Pitch Accuracy [mm] | +/-0.03mm @D 120mm |
| Material Housing | High-strength Al, hard anodized |
| Material Piston Rod | Rustproof hardened |
| Material Disc | Steel |
| Material Gear | 16MnCr5S |
| Material Rack | ETG-100 |
Over 45 years of quality
Made in Germany
Since our foundation in 1979, we have been successfully manufacturing high-precision swivel, rotary indexing, lifting, linear and gripping units in Baden-Württemberg.
Special design features
with special benefits
Day after day, we meet the highest technical and quality requirements of our renowned customers.
Similar articles
Accesories
Watch animations